​​​

Essence of Product

Most customers have described this product as “awesome”, or “revolutionary”, or

“miracle” or “incredible” or “fabulous”. No matter how you describe it, it breaks

many technology and price barriers and reaches new heights of scientific advancement

to manage the quantity and quality of water for your entire home.-

In nutshell, LME not only displays the quality, quantity and usage of water in your home

, it automatically controls the first two to the settings you choose.

And it does all this in a seamless manner where all components of the system communicate with each other without wire connections. The main data and control panel (MDCP) with a bright blue LED display enhances the decor of any kitchen, bathroom, bedroom or anywhere else in the home.

LME provides up to 2000 liters a day of 7 Star quality soft water at fraction of cost.



How it Works:

LME incorporates four subsystems that communicate to each other wirelessly.

  •  Main Data and Control Panel or MDCP
  •  Sump Sensor Data Module
  •  Overhead Sensor Data Module
  •  Softener Data and Control Module


The quantity of water in both the sump tank and the overhead tank is accurately measured with the latest load sensor technology and sump pump is controlled by the MDCP based upon your settings.

The quality of water is primarily dependent on its hardness. An advanced probe that plugs into the MDCP is used to measure the hardness twice a day.

LME is an advanced data collection and processing machine that captures data of quality, quantity and usage, and any alarms recorded in the last six months of operations. It also features advanced diagnostic tools that aids in troubleshooting the entire water system installed, for example alerting to a pump failure condition.


Water Quantity, Quality and Usage Measurement & Control through RFION™ Technology:

No-Contact water level sensors: LME employs the latest in water level sensing technology without use of any level sensors that come in contact with water in the sump or overhead tank. This avoids failure and high maintenance of contact sensors that get corroded with water with high mineral and metal content. These water contact sensors even when fully functional provide only the level of water where the installer has mounted the sensor. For example if the sensor is mounted at about 50% of the height of the tank, it would give an indication that the water level is 50%. If you want to know if the water in the tank is more than 500 liters, you will have to call the installer to readjust the sensor manually. LME uses load or pressure monitoring technology to accurately measure the height of water in the respective tank, which leads to the calculation of liters in the tank once the installer enters the sq. ft. area of the tank. After LME service engineer installs the load sensors of the the water quantity is displayed on the Main Data and Control Panel of the LME. The load sensor provides an analog value that is converted to a digital number and shown in liters. The system shows the total water in the home, in the Sump tank, in the Overhead tank and Total.

TDS and Temperature sensors: TDS is another measure of the quality of water also measured in PPM. TDS measurement can also provide an approximate value of water hardness before the water is softened. TDS stands for Total Dissolved Solids that contribute to the conductivity of water. RO produced drinking water should have a near zero TDS value. The LME

incorporates two sets of TDS and Temperature sensors,one in the Sump tank and the

second with a probe that plugsinto the Main Data and Control Panel, that can be used

to measure the TDS of tap water or any other water you wish to check. It should be

noted that softened water has the same TDS value as the pre-softened water because

the amount of  total dissolved solids is the same. Softening the water only substitutes

the Calcium and Magnesium ions with Sodium ions, so the total dissolved solids remain

the same. For example, if the incoming water has a TDS of 500 PPM and hardness of

300 PPM, the softened water would have a TDS of about the same as 500 PPM, but

the hardness would go down to 20 or so PPM. Sump TDS sensor provides an approximate value of the hardness as well as other minerals or metals in the Sump tank.

Automatic Pump Control: LME features automatic control of the Sump pump motor to maintain the quantities of water user wishes to have in each tank. The sump pump control is incorporated in the Sump Sensor and Control of the module.

Usage Data and Alerts: The main MDCP panel of  is an highly intelligent device. The system as a whole is employing four microprocessors working in conjunction with each other. This allows to collect and display usage data as to daily use of water, weekly use of water, monthly use of water, history of TDS data, Hardness data, Quality data as well as history of all alerts generated by the system. Set point for Alerts, like minimum quantity of water at home, minimum quantity of water in the sump tank, maximum amount of water pumped into the overhead tank, high TDS alert, order water alert, Hardness setting and alerts and a composite Quality alert. Audible sound alerts are also provided with user option to silence the audio alerts.

 Wireless RF Communication: All subsystems or components of the LME

communicate to each other with RF wireless technology using LORA spectrum.

This eliminates the need to rewire the existing home disturbing the decor of the

home besides causing serious convenience to the home owner. It should be

noted however that all the sub systems require a source of power, even

though minimal, less than 50 watts in total. Current LME has been tested to

work up to 8 floors in a normal building. A Repeater is planned to be introduced in

near future to go to higher levels.


Product Features

  • Precise Measurement
  • Artificial Intelligence
  • Systems Diagnostics
  • Maintains user programmed hardness
  • Measures water usage
  • Alert for water leakage
  • Alert for sump pump failure
  • Alerts for ordering water in time
  • Displays total water available
  • Displays next regeneration due
  • Displays salt fill need
  • System designed to operate with power outages
  • Advanced resin technology
  • Extremely rugged compact design, 3 ft. tall
  • Up to 2000 ltr of soft water per day per softener


 


 

Complete Water Treatment Solutions | Air Purification | Renewable Energy - Solar and Wind